Latest Activity
-
scotman replied to the thread 2014 Fiesta SE need tranny advice.You will want to use the search function here to see the discussions on this issue. I am trying to avoid repetitive posts on topics that... -
Happy 4th of July
-
MThe line from the Blower Relay to the BCM or to the Controller (More than likely the controller) - you'll need to do a continuity check...
-
MMinnie79 posted the thread 2013 Fiesta blower motor (power to relay coil) in Maintenance, Warranty Issues & Troubleshooting.Hello. My friend has a 2013 Fiesta. The blower motor recently quit working. As time and weather permits (seems it’s rained all summer so...
-
Bborgward replied to the thread Replace iB/5 input shaft Seal.I will be installing YS4Z-7048-AA in the used transmission. See pictures. Has no spring. The flat side is installed toward the inside of...
-
-
DHappy 4th of July
-
TWe bought a 2014 Ford Fiesta SE from the city. about a year ago. It was a fleet vehicle with 45,000 miles on it. Our 19 year old...
-
Bborgward replied to the thread Replace iB/5 input shaft Seal.Thanks but that's for the ST's 6 speed manual transmission. The SE has a 5 speed iB/5 manual transmission. Has entirely different seal.
-
Bborgward posted the thread Replace iB/5 input shaft Seal in Maintenance, Warranty Issues & Troubleshooting.2013 Fiesta SE Hatch 5 1.6 5 speed manual. Installing used transmission. Already replaced the half shaft seals. How to I remove the...
-
FFiestaparty replied to the thread Adding a circuit or two.Thanks for your ideas. I am nervous about using a circuit with more than a little current on it, even though my guess is my 2 circuits...
-
-
CCARRJ142 liked Barberryn's post in the thread Starts well but sets "service engine" information and powers down engine upon shifting into 1st..Found my throttle pedal and oil service reset issue - a mouse nest and two throttle pedal wires chewed apart. I used help from here to...
-
BBarberryn replied to the thread Starts well but sets "service engine" information and powers down engine upon shifting into 1st..Found my throttle pedal and oil service reset issue - a mouse nest and two throttle pedal wires chewed apart. I used help from here to...
-
-
scotman replied to the thread Adding a circuit or two.I would tap into the wiper circuit to power the dash cam using a “tap a circuit “ fused connector. If the other circuit is going to be...
-
FHello, I have 2 circuits that I want to add to the car. 1. for the dash cam. It is currently in the cigarette lighter which is always...
